I've recently picked up a new phone, a Nexus 6, specifically because it has a pretty good camera. I'm told it's particularly good at processing colors in situations with non-optimal lighting. I'm pretty satisfied with my camera-camera but it'll be nice to have a device that can capture color better on overcast days. These two pictures are taken under the same conditions so I could try making that comparision. What do ya'll think?
Canon Powershot
Nexus 6
Thursday, April 30, 2015
Friday, April 17, 2015
Introducing the Easy Rider
This one's been awhile coming and it's the cheif reason why there haven't been more posts for the past couple weeks. A brother-in-law requested a messenger bag he could roll up and stow while riding his motorcycle and after a couple months to ponder the design, a few proof of concepts, and a lot of drafting I was able to come up with this.
For all that, the design is fairly simple and fundamental, which should also make it reliable. The front is made from a flexible, almost fabric-like utility leather and the back uses a more rigid bison leather (though normally I expect I'd use stoned oil since it's half the price and I can get more of it). In either "mode" the lid fastens closed by pulling a tongue through a keeper. It's faster than a buckle and I find it more convenient and reliable than a snap for something like this. The strap was made from some light veg-tan so it'd be bendy enough not to get in the way. I used a polyester lining because it has a plastic interface that works really well with contact cement. However, I'm not really happy with how it worked out for the edging. It's functional but I think a different material would probably look nicer, especially with the double seams.
All in all, it's lightweight (about .76 kg with the strap), super sturdy, and easy and quick to manage. The biggest drawback is the ~50-60 hour build time. Hopefully I can pare that down without modifying the design because I definitely intend to add this as a regular item on the store.
For all that, the design is fairly simple and fundamental, which should also make it reliable. The front is made from a flexible, almost fabric-like utility leather and the back uses a more rigid bison leather (though normally I expect I'd use stoned oil since it's half the price and I can get more of it). In either "mode" the lid fastens closed by pulling a tongue through a keeper. It's faster than a buckle and I find it more convenient and reliable than a snap for something like this. The strap was made from some light veg-tan so it'd be bendy enough not to get in the way. I used a polyester lining because it has a plastic interface that works really well with contact cement. However, I'm not really happy with how it worked out for the edging. It's functional but I think a different material would probably look nicer, especially with the double seams.
All in all, it's lightweight (about .76 kg with the strap), super sturdy, and easy and quick to manage. The biggest drawback is the ~50-60 hour build time. Hopefully I can pare that down without modifying the design because I definitely intend to add this as a regular item on the store.
Thursday, April 16, 2015
Another week, another pouch
I like making pouches so it's pretty good that I seem to get pretty regular orders for them. This one was a "normal" Spaceman design but made to some custom dimensions. A little shorter and narrower than the usual design.
Tuesday, March 31, 2015
Greyhound Guitar Strap & Set
I've been working on this order for about 5 weeks at this point but it's finally complete with this last guitar strap. It would have been finished last week except the lining was damaged (stain mishap) during its installation so I had to pull it off and install a new lining from scratch. But all in all it came out pretty well.
This one was a little more "artsy" than the others, entailing several rounds of drafting and a few more days of tooling. The client liked elements of vines, celtic knotwork, and sheridan carving (also greyhounds) so I tried to work all of those into a single piece of leather about 2.5 x 32". It was certainly a challenge but worth it in the end. I think the bargrounder worked pretty well for the background, even if it warped the leather a tad in a spot or two. I might wish the resist had worked more uniformly but it's enough to be noticeable and the tinting came out pretty spot on.
As previously mentioned, this was the third and final guitar strap in a set of three all custom made for the client's family. The entire set is now on its way for some uniquely family rocking out time.
This one was a little more "artsy" than the others, entailing several rounds of drafting and a few more days of tooling. The client liked elements of vines, celtic knotwork, and sheridan carving (also greyhounds) so I tried to work all of those into a single piece of leather about 2.5 x 32". It was certainly a challenge but worth it in the end. I think the bargrounder worked pretty well for the background, even if it warped the leather a tad in a spot or two. I might wish the resist had worked more uniformly but it's enough to be noticeable and the tinting came out pretty spot on.
As previously mentioned, this was the third and final guitar strap in a set of three all custom made for the client's family. The entire set is now on its way for some uniquely family rocking out time.
Wednesday, March 18, 2015
Spaceman with Belt Clip
Turns out I'll need to give these their own listing in Etsy but I'm all stocked up in case they become popular. With the latigo anchor they're pretty solid.
Thursday, March 12, 2015
The Wall Bard Guitar
The second guitar strap of the order (same as the Runic Bard Guitar Strap) turned out to emulate Pink Floyd's "The Wall" album cover. Bricks on their own aren't the most striking design so I added a painted applique of the crossed hammers from the album art. That was probably the trickiest part since leather generally doesn't want to be white.
Friday, March 6, 2015
Black Workman Belt
Box store belts seem to be made for a certain body size and anyone who doesn't match that size is left to fend for themselves. So I'm more than happy to pick up their slack and make serviceable, long lasting belts of virtually any length.
Subscribe to:
Posts (Atom)



